| pet recycled extruder 2008-6-9 |
Application and strong point.
Machine is used to sieve,grind clean and prill the waste and old polyethylene,chemical thread,PEPP and the other 2mm thick thermoplast.According to the requires of clients,the output of this line is from 80kg/h to 450kg/h.
Main Technical Parameters
Model Volume Scre...... |
|
| injection mold machinery 2008-6-9 |
Product Description
Model:
DH88-M6,DH128-M6, DH168-M6,DH218-M6,
DH268-M6,DH320-M6, DH400-M6, DH500-M6, DH680-M6
Clamping Force :880KN---6800KN (880Ton-680Ton)
Shot Weight :121g---3465g
Shot Volume :129cm3---3808cm3
Features:
(A) Injection Unit:
Double cylinder cylinde...... |
|
| pp large pipe extruder 2008-6-9 |
PE/PP Large-Diameter Gas-Burning Pipes And Water-Supply Pipes Production LineMould: Mould adopts high-quality alloy steel and throttling device to ensure even pressure of feed influent at the mould lips, and also differential action of up-down piece guarantee even thickness of the plate.
Vacuum...... |
|
| medical pipe extruder 2008-6-9 |
| 1、 Extruder adopts high accuracy hard gearbox drive, screw material adopts high strength nitride alloy steel(38CrMoALA) or high strength quench alloy steel(9Cr18Mo), the main speed regulating system adopts the FUJI(JAP) inverter, no oil and low noise. Temperature controller adopts the RKC(JAP) digit...... |
|
| ppr pipe extruder 2008-6-9 |
• Special single screw extruder for polyolefin, having high extruding velocity and effective plasticization.
• Separation mixing screw specialized for polyolefin.
• Specially designed three co-extruding die, reasonable channel, smooth outside and inside wall, and little internal stress.
• Prod...... |
|
| pvc corrugated pipe extruder 2008-6-9 |
Characteristics
★Treat PVC, PP, PE as raw material to produce one-wall corrugated pipe with small aperture
★Once moulding with relevant matrix, corrugation is even and smooth
★Wire, cable gland, drainpipe, dust-catcher pipe and ventilation pipe for washing machine
★Corrugated pipeline with φ4-6...... |
|
| xps foaming extruder 2008-6-9 |
※XPS foamed board,has a perfect colsed-pore alveolate structure.
※Its density,water absorption,coefficient of geat conducting and the coefficient of steam pervasion are all lower than those of other board heat preservasion materials.
※They have the characteristics of strong intensity,light materia...... |
|
| pvc foaming sheet extruder 2008-6-9 |
Coat hanger type die with two throttle design enable to regulate the sheet thickness accurately;
Separate roller temperature control system to control the temperature of pressing roller to gain even sheet thickness; Exact slicing machine, board length and quantity;
Winder with big torque motor, ...... |
|
|
