| Antenna Receiver Boards with Highly Reliable 2007-9-28 |
Internal receiver series, receiver board
Frequency: 300 to 434MHz
Power: 5/12V
Highly reliable sensitivity
|
|
| Antenna Receiver Boards with Power of 5V 2007-9-28 |
Receiver board with built-in decoder
Frequency: 300 to 434MHz
Power: 5V
Reliable high sensitivity: -96 to -102dBm
KEELOQ hopping transmitters can be learning 4 channel output
Transmitter code learning
|
|
| ZigBee Transceiver with RX Sensitivity of -94dBm 2007-9-28 |
ZigBee transceiver
Maximum data rate: 250Kbps
Frequency: 2.4GHz
RX sensitivity: -94dBm
RX current: 27mA with MCU active
TX power: 0dBm maximum
TX maximum current: 25mA with MCU active
Bandwidth: 232kHz
Working voltage: 2.1 to 3.6V
Application: home, car security systems, consumer e...... |
|
| RF Transceiver Module CC1000-B 2007-9-28 |
RF transceiver module
Maximum data rate: 76.8Kbps
Frequency: 433.92/868/915MHz
RX sensitivity: 110dBm at 1.2Kbps
RX current: 7 to 9mA
TX power: +10dBm maximum
TX maximum current: 26.7mA
Bandwidth: 61kHz
Working voltage: 2.1 to 3.6V
Applications: home, office automations, car securi...... |
|
| Four-layer Green Solder Mask PCB 2007-9-28 |
Board thickness: 1.2mm
Number of layers: four
Hole wall copper thickness: >= 18um
Copper thickness on surface: 1/1OZ
Line width: 5 mil
Line space: 5 mil
Craft: HAL (lead-free)
Minimum hole diameter: 0.35mm
Molding type: punching
|
|
| Green Solder Mask PCB with 4mil/4mil Line 2007-9-28 |
Board thickness: 1.2mm
Number of layers: four
Hole wall copper thickness: >= 20um
Copper thickness on surface: 1/1OZ
Line width: 4 mil
Line space: 4 mil
Craft: immersion gold
Minimum hole diameter: 0.35mm
Molding type: routing
|
|
| Double-sided Green Solder Mask PCB 2007-9-28 |
Board thickness: 1.2mm
Number of layers: double sides
Hole wall copper thickness: >= 25um
Copper thickness on surface: 2/2OZ
Line width: 5 mil
Line space: 5 mil
Craft: HAL(lead-free)
Minimum hole diameter: 0.5mm
Molding type: punching
|
|
| Yellow Solder Mask PCB with Gold-plated Panel 2007-9-28 |
Board thickness: 1.5mm
Number of layers: double sides
Hole wall copper thickness: >=20um
Copper thickness on surface: H/H oz
Line width: 6mil
Line space: 6mil
Craft: gold-plated
Minimum hole diameter: 0.8mm
Molding type: punching + chamfering
|
|
|
